Monday, March 29, 2010

Esquisse Three: Form vs. Function




Function: This design uses the "Alternate Paperclip" from esquisse two as the wire structure which holds the chair together. these clip over and create a seat platform, where the piece of balsa sits on top of.
This design is practical and would be easy to manufacture. It comprises 5 pieces. The strength of the wire would need to be researched, as it carries the load.

Esquisse Three: Form vs. Function




Form: This design is a simple cross over piece of balsa which locks in place. It then has U shaped (or 3/4 of a square) wire inserts which alternate their weave across the balsa, creating a seat.




This design would be difficult to manufacture, and the wire would need to be correctly spaced and not to tense on the seat area, for comfort reasons- it would need to give a little. However, the aesthetic is nice and it displays balance, line, shape and positive/negative space, which create interest to the eye.

Monday, March 22, 2010

Esquisse Two: Locking Systems




The Slot and Slide: slide half the clip into place, then twist 90 degrees and it will lock in place. Can also slide a second piece of balsa on top of clip for double thickness/strength.

Esquisse Two: Locking Systems





The Slot and Slide: slide half the clip into place, then twist 90 degrees and it will lock in place. Can also slide a second piece of balsa on top of clip for double thickness/strength.

Sunday, March 21, 2010

Esquisse Two: Locking Systems


The Slot and Peg: Two pieces of balsa held together by a wire pin. Creates 90 degree angles.

Esquisse Two: Locking Systems



The Slide Clip: holds two pieces of balsa together, and could also be used for strengthening applications.

Esquisse Two: Locking Systems



The Alternate Paperclip: It holds two pieces of balsa together, while also providing a 90 degree angle on the wire.

Friday, March 19, 2010

Esquisse One: Triangulation

3mm Balsa wood with 1mm Wire. Small wire hooks intersect and join with a central pin that runs parallel to sloping edge of triangle. This central pin holds the structure together while allowing complete dis assembly through removal.

Week Two Sketch Design


NGV Furniture Sketches




Frank Gehry, Alvar Aalto & Arne Jacobsen.